Water Ingress Alarm System — SOLAS Requirement !
14 Temmuz 2022PR Plus° – Pipe Repair Plus
14 Temmuz 2022
FEATURES:
Repairs leak in 30 minutes
Applicable to pipes up to 18″ (457 mm) diameter
Applicable on any metal or non-metal pipes
Repairs T-joint, elbow joint, valve thread, valve body
Withstand pressure up to 400 psi (28 kg/cm2)
Withstand temperature up to 200 °C (392 °F)
Safe for drinking water and resistant to most chemicals
Reinforce and strengthen pipe after repair
Permanent repair and extend service life of pipes
PACKAGE:
--> PRK° – Fiberglass Tape
---> 2″ x 5′ (50 mm x 1.2 m)
---> 2″ x 6′ (50 mm x 1.8 m)
---> 2″ x 12′ (50 mm x 3.6 m)
---> 3″ x 9′ (75 mm x 2.7 m)
---> 4″ x 12′ (100 mm x 3.6 m)
--> 1 unit of Epoxy Putty stick
--> 1 pair of latex gloves
--> Operating instruction
APPLICABLE MATERIAL:
• Steel
• Copper
• Aluminium
• Galvanized steel
• PVC
• CPVC
• Stainless steel
• Polyethylene
• Polypropylene
• Cast-iron
• Concrete
• FRP/GRE
CHEMICAL RESISTANCE:
• Oil
• Water (drinking water, wastewater, steam)
• Solvents (acetone, toluene, MEK, ethyl alcohol)
• Mild acids (hydrochloric acid, sulfuric acid) and alkalis
• Chemical (ethylene glycol, xylenes, ammonia)
• Hydrocarbons
• Bases
• Slurries
• Fuels (petroleum, diesels, gasoline)
• Gases (LNG, LPG)
• Organic salts
CURING TIME:
• 30 minutes at 30 °C (86 °F)
Heat may be applied to decrease curing time.
Unopened foil pouch may be immersed in cold water, prior to repair, to raise working and curing time.
Pressure tested | : | 1/2″ (15 mm) steel pipe with 1/8″ (3 mm) hole when repaired with PRK° withstands 4000 psi (281 kg/cm2) |
| | 1/2″ (15 mm) steel pipe with 1/2″ (13 mm) hole when repaired with PRK° withstands 600 psi (42 kg/cm2) |
Tensile strength | : | 3920 psi (276 kg/cm2) |
Bond strength | : | 230 psi (16 kg/cm2) |
Bond strength | : | 230 psi (16 kg/cm2) |
Tensile elongation | : | 1.2 % ± 0.7 % |
Compression strength | : | 13750 ± 530 psi (967 ± 37 kg/cm2) |
Yield strength | : | 2260 psi (159 kg/cm2) |
Cured hardness | : | 82 Shore D |