BC Pipe Dressing PD-22
2 Temmuz 2022BNWAS & SVDR Original Spares
14 Temmuz 2022
BITUSHIP HATCH COVER TAPES
Product Definition: Self-adhesive tape laminated with elastomeric bitumen based high-strength polyester film.
Application:
Surface of application should be dry,clean and free of oils , rust, silicones and dirt. Silicone film at the bottom surface is removed at the time of application and the product is applied directly on the surface prepared. Following the application, pressure is applied with a silicone on the product surface to ensure full adhesion avoiding air bubbles. Please refer to the application manual.
Storing:
The product may be stored for maximum 1 year as of its production date in dry , ventilated and covered places at 5-25⁰.Protect from direct sunlight , cold weather , water, frost and severe weather conditions.
Packaging:
Bituship is produced in 2 different dimensions, 15 cm width x 20 m length and 10 cm width and 20 m lenght. 15 cm product is presented in 2 rolls packed in boxes; whereas , our 10 cm product is presented in 3 rolls packed in boxes. Bituship tape is 2 mm thick.| TEST | METHOD | UNIT | TOLERANCE | VALUE |
|---|
| Visual Defects | TS EN 1850-1 | - | - | none |
| Length | TS EN 1848-1 | m | -0,03 | 20 |
| Width | TS EN 1848-1 | cm | -1 | 10-15 |
| Dimensional Deviation | TS EN 1848-1 | - | - | pass |
| Thickness | TS EN 1849-1 | mm | ±0,2 | 2 |
| Water Tightness | TS EN 1928 (Method A 10kPa) | - | – | full |
| Reaction to Fire | TS EN 13501-1 | class | – | E |
| External Fire Performance | TS ENV 1187 / TS EN 13501-1 | class | – | broof |
| Flexibility at Low Temperature | TS EN 1109 (upper surface) | ⁰C | min. | -20 |
| “ | Artificial Aging (EN 1296) | ⁰C | (-0 ; +10) | -20 |
| Adhesion Strength | TS EN 12316-1 | N | min. | 100 |
| Heat Resistance (less than 2 mm) | TS EN 1110 | ⁰C | min. | 85 |
| “ | Following the artificial aging (EN 1296) | ⁰C | (-10 ; +0) | 85 |
| Tensile Strength (length) | TS EN 12311-1 | N/50 mm | (-%0 ; +%30) | 270 |
| Elongation and Break (length) | TS EN 12311-1 | % | (-0 ; +20) | 50 |
| Impact Resistance | TS EN 12691 (Method A) | mm | min. | 900 |
| Resistance Against Static Loads | TS EN 12730 (Method B) | kg | min. | 20 |
| Tear Resistance (length) | TS EN 12310-1 | N | ±30% | 55 |
| Hazardous Materials | - | - | - | none |
Turkish
English